View Our
Lighting Products.

Rigid Conduit

Products
Compression Connectors
– Steel –		 Compression Couplings
– Steel –		 Three Piece Couplings
– Malleable Iron –
Compression Rigid Connectors
– Malleable Iron –		 Compression Rigid Couplings
– Steel –		 Rigid to Rigid Pull Elbows
– Zinc Die-Cast –
Rigid to Box Pull Elbows
– Zinc Die-Cast –		 Thread Couplings
– Steel –		 Conduit Nipples
– Zinc Die-Cast –
Conduit Nipples
– Malleable Iron –		 Conduit Locknuts
– Steel –		 Die-Cast Locknuts
– Zinc Die-Cast –
Plastic Insulating Bushings
– Thermoplastic –		 Insulated Metallic Grounding
Bushings w/ Lay-In Lug
– Zinc Die-Cast –		 Insulared Metallic Grounding
Bushings w/ Lay-In Lug
– Malleable Iron –
Reducing Bushings/a>
– Zinc Die-Cast –		 Reducing Bushings
– Steel –		 Insulated Metallic
Conduit Bushings
– Zinc Die-Cast –
Metalic Conduit Bushings
– Malleable Iron –		 Reducing Washers
– Steel –		 Floor Flanges
– Malleable Iron –
Offset Nipples
– Zinc Die-Cast –		 Watertight Conduit Hubs
– Zinc Die-Cast –		 Watertight Conduit Hubs
– Malleable Iron –
Service Entrance Ells
– Die-Cast Aluminum –		 Mogul Conduit Bodies (LB Type)
– Die-Cast Aluminum –		 LB Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –
LR Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –		 LL Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –		 T Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –
C Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –		 X Type Threaded Aluminum
Coduit Bodies
– Die-Cast Aluminum –		 LB Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –
LR Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –		 LL Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –		 T Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –
C Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –		 X Type Threaded Malleable
Aluminum Coduit Bodies
– Malleable Iron –		 Stamped Steel Covers
– Stamped Steel –
Neoprene Gaskets
– Neoprene –		 Rigid Threaded Nipples
– Zinc Plated Steel –		 Rigid One Hole Straps
– Stamped Steel –
Rigid Two Hole Straps
– Stamped Steel –		 Malleable Clamp Back
– Malleable Iron –		 Rigid Conduit Hangers
w/ Nut & Bolt
– Stamped Steel –
Rigid Conduit Hangers
w/o Nut & Bolt
– Stamped Steel –

SPEC SHEET

Compression Connectors

Use:

Compression type connectors are used to secure and terminate threadless Rigid or IMC Conduits to a steel outlet box or metal enclosure.

Materials

Certification

ORDERING INFORMATION

Catalog Number UPC No Trade Ctn/Case Case
Number 0-87115 Size Qty/Qty Wt.
Boxed
9146* 09146-8 2.5 8 13.0
9147* 09147-5 3" 5 12.0
9148* 09148-2 3-1/2" 5 15.0
9149* 09149-9 4" 5 17.0
*EMT & RIGID
Back to Top

SPEC SHEET

Compression Couplings

Use:

Compression type couplings are used to join two lengths of threadless Rigid or IMC Conduit.

Materials

Certification

ORDERING INFORMATION

Catalog Number UPC No Trade Ctn/Case Case
Number 0-87115 Size Qty/Qty Wt.
Boxed
9136* 09136-9 2-1/2" 8 13.0
9137* 09137-6 3" 5 13.0
9138* 09138-3 3-1/2" 5 13.0
9139* 09139-0 4" 5 18.0
*EMT & RIGID
Back to Top

SPEC SHEET

Three Piece Couplings

Use:

Used to connect two lengths of threaded rigid conduit or IMC,when neither conduit can be turned. Cast of high strength malleable iron and zinc plated.

Materials

Certification

ORDERING INFORMAION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-31857 Size A B C Unit Qty/Qty Wt.
Boxed
9520 09520-6 1/2" 1.64 1.13 0.85 - 10/100 20.4
9521 09521-3 3/4" 1.80 1.37 1.07 - 5/50 12.9
9522 09522-0 1" 1.88 1.69 1.29 - 5/50 25.2
9523 09523-7 1 1/4" 2.09 2.07 1.61 - 5/25 22.3
9524 09524-4 1 1/2" 2.40 2.28 1.85 - 5/25 30.7
9525 09525-1 2" 2.33 2.78 2.33 - 20 36.8
9526 09526-8 2 1/2" 2.09 2.07 1.61 - 10 31.0
9527 09527-5 3" 2.40 2.28 1.85 - 5 16.0
9528 09528-2 3 1/2" 2.33 2.78 2.33 - 5 29.8
9529 09529-9 4" 2.33 2.78 2.33 - 2 15.1
Back to Top

SPEC SHEET

Compression Rigid Connectors For threadless Rigid Conduit and IMC Malleable Iron

Use:

Compression type connectors are used to secure and terminate threadless Rigid or IMC Conduits to a steel outlet box or metal enclosure.

Materials

Certification

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
9160 09160-4 1/2" 1 1/2" 1/2" 1 1/2" 25/250 50.8
9161 09161-1 3/4" 1 1/2" 1/2" 1 5/8" 25/250 55.8
9162 09162-8 1" 1 11/16" 9/16" 2" 25/100 33.7
9163 09163-5 1 1/4" 2" 11/16" 5/50 2 3/8" 26.0
9164 09164-2 1 1/2" 2 1/16" 11/16" 2 5/8" 5/50 32.7
9165 09165-0 2" 2 1/4" 7/8" 3 5/16" 20 21.4
9166 09166-6 2 1/2" 2 15/16" 1 1/4” 3 3/4" 5 12.1
9167 09167-3 3" 3 1/8" 1 3/8" 4 1/4" 3 8.9
9168 09168-0 3 1/2" 3 1/8" 1 3/8" 4 3/4" 2 7.7
9169 09169-7 4" 3 3/8" 1 1/2" 5 5/16" 2 9.4
Boxed w/ Insulated Throat
9170 09170-3 1/2" 1 9/16" 9/16" 1 1/2" 25/250 51.3
9171 09171-0 3/4" 1 9/16" 9/16" 1 5/8" 25/250 56.5
9172 09172-7 1" 1 3/4" 5/8" 2" 25/100 34.1
9173 09173-4 1 1/4" 2" 11/16" 2 3/8" 5/50 26.3
9174 09174-1 1 1/2" 2 1/8" 3/4" 2 5/8" 5/50 33.0
9175 09175-8 2" 2 5/16" 13/16" 3 5/16" 20 22.7
9176 09176-5 2 1/2" 3" 1 5/16" 3 3/4" 5 12.3
9177 09177-2 3" 3 1/8" 1 7/16" 4 1/4" 3 9.0
9178 09178-0 3 1/2" 3 3/16" 1 1/2" 4 3/4" 2 7.8
9179 09179-6 4" 3 7/16" 1 9/16" 5 5/16" 2 9.4
Back to Top

SPEC SHEET

Compression Rigid Coupling For threadless Rigid Conduit and IMC Malleable Iron

Use:

Compression type couplings are used to join two lengths of threadless Rigid or IMC Conduit.

Materials

Certification

SPEC SHEET

Rigid to Rigid Pull Elbows

Use:

CPull elbows are used to facilitate pulling conductors through a 90° bend in a run of Rigid or IMC conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed W/O Gaskettd>
8345 08345-6 1/2" 1.31 1.02 0.96 10/100 18.8
8346 08346-3 3/4" 1.37 1.28 1.26 5/50 13.3
Boxed W/ Gasket
8345-G 08359-3 1/2" 1.31 1.02 0.96 10/100 19.6
8346-G 08349-4 3/4" 1.37 1.28 1.26 5/50 13.7
8347-G 08347-0 1" 1.95 1.55 1.52 25 15.6
8348-G 08348-7 1 1/4" 2.32 1.92 1.88 20 18.8
Back to Top

SPEC SHEET

Rigid to Box Pull Elbows

Use:

Pull elbows are used to facilitate pulling conductors through a 90° bend in a run of Rigid or IMC conduit. The removable cover gives ample access so that wire pulling can be achieved without any obstructions.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed W/O Gasket
8335 08335-7 1/2" 1.31 1.02 0.96 10/100 18.3
8336 08336-4 3/4" 1.37 1.28 1.18 5/50 13.0
Boxed With Gasket
8335-G 08405-7 1/2" 1.31 1.02 0.96 10/100 19.2
8336-G 08414-9 3/4" 1.37 1.28 1.18 5/50 13.3
Back to Top

SPEC SHEET

Threaded Couplings

Use:

Threaded couplings are used to join two lengths of threaded Rigid or IMC Conduit.

Materials

Finish

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B Unit Wt.
Boxed
9000 09000-3 1/2" 1 5/8" 1" 100 12.6
9001 09001-0 3/4" 1 5/8" 1 1/4" 50 8.0
9002 09002-7 1" 2" 1 1/2" 30 8.3
9003 09003-4 1 1/4" 2 1/16" 1 7/8" 25 8.3
9004 09004-1 1 1/2" 2 1/8" 2 1/8" 25 11.0
9005 09005-0 2" 2 3/16" 2 5/8" 20 14.1
9006 09006-5 2 1/2" 3 3/16" 3 3/16" 12 20.4
9007 09007-2 3" 3 1/4" 3 13/16" 8 16.4
9008 09008-9 3 1/2" 3 7/16" 4 1/2" 4 10.6
9009 09009-6 4" 3 1/2" 4 13/16" 4 13.9
Back to Top

SPEC SHEET

Conduit Nipples

Use:

Conduit nipples are used to terminate threaded conduit to a knock-out, outlet box or metal enclosure where room is limited, or with a locknut to connect two outlet boxes or metal enclosures side by side or back to back.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
8220 08220-6 1/2" 0.93 0.59 0.44 - 100/1000 29.4
8221 08221-3 3/4" 1.19 0.71 0.50 - 50/500 28.4
8222/td> 08222-0 1" 1.39 0.84 0.63 - 25/250 18.7
8223 08223-7 1 1/4" 1.75 0.87 0.63 - 25/250 27.7
8224 08224-4 1 1/2" 2.13 0.90 0.63 - 25/100 16.0
8225 08225-1 2" 2.56 1.01 0.72 - 10/40 9.1
8226 08226-8 2 1/2" 3.28 1.43 1.04 - 10/40 15.6
8227 08227-5 3" 2.13 0.90 0.63 - 10/40 19.2
8228 08228-2 3 1/2" 2.56 1.01 0.72 - 10/40 27.5
8229 08229-9 4" 3.28 1.43 1.04 - 5/20 16.9
Boxed w/ Insulated Throat
8230 08230-5 1/2" 0.93 0.59 0.44 - 100/1000 29.4
231 08231-2 3/4" 1.19 0.71 0.50 - 50/500 28.4
232 08232-9 1" 1.39 0.84 0.63 - 25/250 18.7
8233 08233-6 1 1/4" 1.75 0.87 0.63 - 25/250 27.7
8234 08234-3 1 1/2" 2.13 0.90 0.63 - 25/100 16.0
8235 08235-0 2" 2.56 1.01 0.72 - 10/40 9.1
8236 08236-7 2 1/2" 3.28 1.43 1.04 - 10/40 15.6
8237 08237-4 3" 2.13 0.90 0.63 - 10/40 19.2
8238 08238-1 3 1/2" 2.56 1.01 0.72 - 10/40 27.5
8239 08239-8 4" 3.28 1.43 1.04 - 5/20 16.9
Back to Top

SPEC SHEET

Conduit Nipples Malleable Iron

Use:

Compression type connectors are used to secure and terminate steel EMT conduit to knock-outs in concrete-tight box, dry or damp location applications.

Materials

Certification

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9510 09510-7 1/2" 0.93 0.59 0.44 - 100/500 26.9
9511 09511-4 3/4" 1.19 0.71 0.50 - 50/250 20.0
9512 09512-1 1" 1.39 0.84 0.63 - 25/125 12.0
9513 09513-8 1 1/4" 1.75 0.87 0.63 - 25/125 28.9
9514 09514-5 1 1/2" 2.13 0.90 0.63 - 25/125 35.4
9515 09515-2 2" 2.56 1.01 0.72 - 10/40 16.4
9516 09516-9 2 1/2" 3.28 1.43 1.04 - 10 6.4
9517 09517-6 3" 2.13 0.90 0.63 - 10 10.0
9518 09518-3 3 1/2" 2.56 1.01 0.72 - 10 13.2
9519 09519-0 4" 3.28 1.43 1.04 - 5 8.9
Back to Top

SPEC SHEET

Conduit Locknuts

Use:

Conduit locknuts are used for securing Rigid and IMC Conduits and other threaded connectors to a steel outlet box or metal enclosure.

Materials

Finish

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
131 70805-2 3/8" 1.12 0.09 1.00 100/1000 11.5
132 70810-6 1/2" 1.37 0.10 1.25 100/1000 11.4
133 70815-1 3/4" 1.75 0.12 1.56 100/1000 16.2
134 70820-5 1" 2.12 0.12 1.91 100/1000 27.2
149 70825-0 1 1/4" 2.43 0.12 2.16 50/500 18.9
150 70830-4 1 1/2" 2.93 0.12 2.68 50/500 25.2
151 70835-9 2" 3.56 0.17 3.25 40/400 29.3
152 70840-3 2 1/2" 4.18 0.17 3.95 30/300 44.4
153 70845-8 3" 5.37 0.17 5.00 25/250 43.0
154 70850-2 3 1/2" 2.93 0.12 2.68 25/125 18.3
155 70855-7 4" 3.56 0.17 3.25 20/100 26.0
156 70860-1 5" 4.18 0.17 3.95 10/30 23.5
157 70865-6 6" 5.37 0.17 5.00 10/30 26.5
Back to Top

SPEC SHEET

Die-Cast Locknuts

Use:

Conduit locknuts are used for securing Rigid and IMC Conduits and other threaded connectors to a steel outlet box or metal enclosure.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B Qty/Qty Wt.
Boxed
8450 08450-2 1/2" 1.10 0.14 100/1000 10.5
8451 08451-9 3/4" 1.35 0.14 100/1000 11.3
8452 08452-6 1" 1.68 0.18 100/1000 20.7
8453 08453-3 1 1/4" 2.06 0.21 50/500 16.0
8454 08454-0 1 1/2" 2.38 0.21 20/200 9.7
8455 08455-7 2" 2.92 0.21 25/250 17.8
8456 08456-4 2 1/2" 3.52 0.29 10/100 12.2
8457 08457-6 3" 4.12 0.29 10/100 17.0
8458 08458-3 3 1/2" 4.67 0.31 10/50 8.7
8459 08459-0 4" 5.25 0.31 10/50 10.0
Back to Top

SPEC SHEET

Plastic Insulating Bushings

Use:

Plastic insulating bushings are used on the end of Rigid and IMC Conduits and other threaded connectors to provide a smooth well rounded bearing surface to protect wires or cables.

Materials

Finish

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
171 09003-3 1/2" 1.04 0.39 0.60 100/1000 7.4
172 70710-9 3/4" 1.27 0.41 0.78 100/1000 9.7
173 70715-4 1" 1.55 0.56 1.00 50/500 9.6
174 70720-8 1 1/4" 1.90 0.57 1.33 25/250 7.4
175 70725-3 1 1/2" 2.18 0.57 1.54 50 1.9
176 70730-7 2" 3.17 0.73 2.36 50 2.3
177 70735-2 2 1/2" 3.17 0.73 2.36 25 2.0
178 70740-6 3" 3.80 0.76 3.00 25 2.4
179 70745-1 3 1/2" 3.80 0.76 3.00 25 2.4
170 70750-5 4" 3.80 0.76 3.00 25 2.4
Back to Top

SPEC SHEET

Insulated Metallic Grounding Bushings w/ Lay-In Lug

Use:

Insulated metallic grounding bushings are used on the end of Rigid and IMC Conduits and other threaded connectors to provide a smooth well rounded bearing surface to protect wires or cables as well as providing a means to connect a grounding conductor.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
8270 08270-1 1/2" 1.04 0.50 0.54 - 100/500 16.2
8271 08271-8 3/4" 1.28 0.50 0.74 - 50/250 21.5
8272 08272-5 1" 1.52 0.59 0.96 - 50/250 27.2
8273 08273-2 1 1/4" 1.87 0.61 1.27 - 25/125 13.5
8274 08274-9 1 1/2" 2.16 0.60 1.49 - 25/125 17.9
8275 08275-6 2" 2.67 0.60 1.95 - 10/50 22.9
8276 08276-3 2 1/2" 1.52 0.59 0.96 - 10 27.2
8277 08277-0 3" 1.87 0.61 1.27 - 5/25 13.5
8278 08278-7 3 1/2" 2.16 0.60 1.49 - 10 17.9
8279 08279-4 4" 2.67 0.60 1.95 - 10 22.9
Back to Top

SPEC SHEET

(Malleable) Insulated Metallic Grounding Bushings w/ Lay-in Lug

Use:

Insulated metallic grounding bushings are used on the end of Rigid and IMC Conduits and other threaded connectors to provide a smooth well rounded bearing surface to protect wires or cables as well as providing a means to connect a grounding conductor.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9560 09560-2 1/2" 1.04 0.50 0.54 - 100/500 49.0
9561 09561-9 3/4" 1.28 0.50 0.74 - 50/250 30.0
9562 09562-6 1" 1.52 0.59 0.96 - 50/250 44.0
9563 09563-3 1 1/4" 1.87 0.61 1.27 - 25/125 29.2
9564 09564-0 1 1/2" 2.16 0.60 1.49 - 25/125 35.6
9565 09565-7 2" 2.67 0.60 1.95 - 10/50 17.3
9566 09566-4 2 1/2" 1.52 0.59 0.96 - 10 5.60
9567 09567-1 3" 1.87 0.61 1.27 - 10 6.80
9568 09568-8 3 1/2" 2.16 0.60 1.49 - 10 7.80
9569 09569-5 4" 2.67 0.60 1.95 - 10 9.60
Back to Top

SPEC SHEET

Reducing Bushings

Use:

Reducing bushings are used to reduce the entry size of threaded conduit to allow joining conduits of two different sizes.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
8461 08461-2 3/4'-1/2" 0.62 0.80 0.12 - 50/500 20.2
8462 08462-9 1"-1/2" 0.70 1.00 0.13 - 25/250 27.9
8463 08463-6 1"-3/4" 0.70 1.00 0.13 - 25/250 32.7
Back to Top

SPEC SHEET

Reducing Bushings

Use:

Reducing bushings are used to reduce the entry size of threaded conduit to allow joining conduits of two different sizes.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B Qty/Qty Wt.
Boxed
9630 09630-2 3/4"- 1/2" 1" 9/16" 100/500 22.0
9631 09631-9 1"- 1/2" 1 5/16" 5/8" 50/250 32.8
9632 09632-6 1"- 3/4" 1 5/16" 5/8" 50/250 18.8
9633 09633-3 1 1/4"- 1/2" 1 5/8" 3/4" 20/100 28.8
9634 09634-0 1 1/4"- 3/4" 1 5/8" 3/4" 20/100 21.9
9635 09635-7 1 1/4"- 1" 1 5/8" 3/4" 25/100 14.4
9636 09636-4 1 1/2"- 1/2" 1 7/8" 3/4" 10.50 20.3
9637 09637- 1 1/2"- 3/4" 1 7/8" 3/4" 10/50 17.2
9638 09638-8 1 1/2"- 1" 1 7/8" 3/4" 10/50 12.9
9639 09639-5 1 1/2"- 1 1/4" 1 7/8" 3/4" 10/50 5.8
9640 09640-1 2"- 1" 2 5/16" 7/8" 10/50 33.2
9641 09641-8 2"- 1 1/4" 2 5/16" 7/8" 10/50 24.4
9642 09642-5 2"- 1 1/2" 2 5/16" 7/8" 10/50 16.9
Malleable Iron
9643 09643-2 2 1/2"- 1" 2 7/8" 1 5/16" 5 6.3
9644 09644-9 2 1/2"- 1 1/4" 2 7/8" 1 5/16" 5 6.4
9645 09645-6 2 1/2"- 1 1/2" 2 7/8" 1 5/16" 5 5.3
9646 09646-3 2 1/2"- 2" 2 7/8" 1 5/16" 5 3.4
9647 09647-0 3"- 1" 3 7/16" 1 5/16" 5 9.5
9648 09648-7 3"- 1 1/4" 3 7/16" 1 5/16" 5 9.5
9649 09649-4 3"- 1 1/2" 3 7/16" 1 5/16" 5 8.1
9650 09650-0 3"- 2" 3 7/16" 1 5/16" 5 7.4
9651 09651-7 3"- 2 1/2" 3 7/16" 1 9/16" 5 5.9
9652 09652-4 3 1/2"- 2" 4" 1 1/2" 5 12.0
9653 09653-1 3 1/2"- 2 1/2" 4" 1 9/16" 5 11.7
9654 09654-8 3 1/2"- 3" 4" 1 5/8" 5 5.6
9655 09655-5 4"- 2" 4 7/16" 1 1/2" 5 15.2
9656 09656-2 4"- 2 1/2" 4 7/16" 1 1/2" 5 17.5
9657 09657-9 4"- 3" 4 7/16" 1 9/16" 5 11.9
9658 09658-6 4"- 3 1/2" 4 7/16" 1 3/4" 5 6.9
9659 09659-3 5"- 4" 5 1/2" 1 3/4" 1 3.8
9660 09660-9 6"- 5" 6 9/16" 1 3/4" 1 4.6
Back to Top

SPEC SHEET

Insulated Metallic Conduit Bushings

Use:

Insulated Metallic Conduit bushings are used on the end of Rigid and IMC Conduits and other threaded connectors to provide a smooth well rounded bearing surface to protect wires or cables.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
8260 08260-2 1/2" 1.28 0.42 0.54 100/1000 29.9
8261 08261-9 3/4" 1.53 0.42 0.74 50/500 21.9
8262 08262-6 1" 1.86 0.5 0.96 25/250 15.4
8263 08263-3 1 1/4" 2.16 0.51 1.27 25/250 24.7
8264 08264-0 1 1/2" 2.63 0.52 1.49 10/100 11.9
8265 08265-7 2" 2.72 0.51 1.95 10/100 14.9
8266 08266-4 2 1/2" 3.22 0.83 2.32 10 2.8
8267 08267-1 3" 3.85 0.83 2.92 10 3.4
8268 08268-8 3 1/2" 3.22 0.83 2.32 10 3.9
8269 08269-5 4" 3.85 0.83 2.92 10 4.5
Boxed w/ Insulated Throat
8250 08250-3 1/2" 1.28 0.42 0.54 100/1000 29.9
8251 08251-0 3/4" 1.53 0.42 0.74 50/500 21.9
8252 08252-7 1" 1.86 0.5 0.96 25/250 15.4
8253 08253-4 1 1/4" 2.16 0.51 1.27 25/250 24.7
8254 08254-1 1 1/2" 2.63 0.52 1.49 10/100 11.9
8255 08255-0 2" 2.72 0.51 1.95 10/100 14.9
8256 08256-5 2 1/2" 3.22 0.83 2.32 10 2.8
8257 08257-2 3" 3.85 0.83 2.92 10 3.5
8258 08258-9 3 1/2" 3.22 0.83 2.32 10 4.1
8259 08259-6 4" 3.85 0.83 2.92 10 4.7
Back to Top

SPEC SHEET

(Malleable Iron) Metallic Conduit Bushings

Use:

Metallic Conduit bushings are used on the end of Rigid and IMC Conduits and other threaded connectors to provide a smooth well rounded bearing surface to protect wires or cables.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
9550 09550-8 1/2" 1.28 0.42 0.54 100/500 40.1
9551 09551-5 3/4" 1.53 0.42 0.74 50/250 24.9
9552 09552-2 1" 1.86 0.5 0.96 50/250 41.2
9553 09553-9 1 1/4" 2.16 0.51 1.27 25/125 31.5
9554 09554-6 1 1/2" 2.63 0.52 1.49 10/100 26.7
9555 09555-3 2" 2.72 0.51 1.95 10/100 33.3
9556 09556-0 2 1/2" 3.22 0.83 2.32 10 4.9
9557 09557-7 3" 3.85 0.83 2.92 10 6.3
9558 09558-4 3 1/2" 3.22 0.83 2.32 10 7.7
9559 09559-1 4" 3.85 0.83 2.92 10 9.3
Back to Top

SPEC SHEET

Reducing Washers

Use:

Reducing washers are used to reduce the size of a knock-out in a steel outlet box or metal enclosure. Two reducing washers are required for each knock-out

Materials

Certification

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
9200 09200-7 3/4"- 1/2" 0.87 1.44 0.04 100/1000 11.9
9201 09201-4 1"- 1/2" 0.87 1.75 0.04 250/2500 21.9
9202 09202-1 1"- 3/4" 1.11 1.75 0.04 100/1000 21.9
9203 09203-8 1 1/4"- 1/2" 0.87 2.18 0.04 50/500 16.9
9204 09204-5 1 1/4"- 3/4" 1.11 2.185 0.04 100/1000 16.9
9205 09205-0 1 1/4"- 1" 1.37 2.185 0.04 50/500 11.9
9206 09206-9 1 1/2"- 1/2" 0.87 2.44 0.04 50/500 26.9
9207 09207-6 1 1/2"- 3/4" 1.11 2.44 0.03 100/1000 26.9
9208 09208-3 1 1/2"- 1" 1.37 2.44 0.04 100/1000 39.4
9209 09209-0 1 1/2"- 1 1/4" 1.72 2.44 0.04 100/1000 39.4
9210 09210-6 2"- 1/2" 0.87 3.00 0.03 25/250 21.9
9211 09211-3 2"- 3/4" 1.11 3.00 0.04 25/250 21.9
9212 09212-0 2"- 1" 1.37 3.00 0.04 25/250 19.4
9213 09213-7 2"- 1 1/4" 1.72 3.00 0.04 25/250 19.4
9214 09214-4 2"- 1 1/2" 1.98 3.00 0.04 25/250 16.9
9215 09215-1 2 1/2"- 1/2" 0.87 3.50 0.04 25/250 21.9
9216 09216-8 2 1/2"- 3/4" 1.11 3.50 0.04 25/250 21.9
9217 09217-5 2 1/2"- 1" 1.37 3.50 0.04 25/250 19.4
9218 09218-0 2 1/2"- 1 1/4" 1.73 3.50 0.04 25/250 16.9
9219 09219-9 2 1/2"- 1 1/2" 1.98 3.50 0.04 25/250 14.4
9220 09220-5 2 1/2"- 2" 2.46 3.50 0.04 25/250 11.9
9221 09221-0 3"- 1/2" 0.88 4.13 0.04 25 6.0
9222 09222-9 3"- 3/4" 1.11 4.13 0.04 25 5.0
9223 09223-6 3"- 1" 1.37 4.13 0.04 25 5.0
9224 09224-3 3"- 1 1/4" 1.73 4.13 0.04 25 4.0
9225 09225-0 3"- 1 1/2" 1.98 4.13 0.04 25 3.0
9226 09226-7 3"- 2" 2.47 4.13 0.04 25 2.0
9227 09227-4 3"- 2 1/2" 2.97 4.13 0.04 25 2.0
9228 09228-1 3 1/2"- 1/2" 0.88 4.63 0.06 10 3.0
9229 09229-8 3 1/2"- 3/4" 1.11 4.63 0.06 10 3.0
9230 09230-3 3 1/2"- 1" 1.37 4.63 0.06 10 3.0
9231 09231-9 3 1/2" - 1 1/4" 1.73 4.63 0.06 10 3.0
9232 09232-5 3 1/2" - 1 1/2" 1.98 4.63 0.06 10 3.0
9233 09233-1 3 1/2" - 2" 2.47 4.63 0.06 10 3.0
9234 09234-4 3 1/2" - 2 1/2" 2.97 4.63 0.06 10 2.0
9235 09235-0 3 1/2" - 3" 3.59 4.63 0.06 10 2.0
9236 09236-6 4"- 1/2" 0.88 5.15 0.06 10 3.0
9237 09237-2 4" - 3/4" 1.11 5.15 0.06 10 3.0
9238 09238-8 4" - 1" 1.37 5.15 0.06 10 3.0
9239 09239-4 4" - 1 1/4" 1.73 5.15 0.06 10 2.0
9240 09240-9 4" - 1 1/2" 1.98 5.15 0.06 10 2.0
9241 09241-5 4" - 2" 2.47 5.15 0.06 10 2.0
9242 09242-1 4" - 2 1/2" 2.97 5.15 0.06 10 2.0
9243 09243-7 4" - 3" 3.59 5.15 0.06 10 2.0
9244 09244-0 4" - 3 1/2" 4.13 5.15 0.06 10 1.0
Back to Top

SPEC SHEET

Floor Flanges

Use:

Used to support rigid conduit or IMC to the floor. Cast of high strength malleable iron and zinc plated.

Materials

ORDERING INFORMATION

Catalog Number UPC No Trade Ctn/Case Case
Number 0-87115 Size Qty/Qty Wt.
Boxed
9540 09540-4 1/2" 25 6.6
9541 09541-1 3/4" 20 6.3
9542 09542-8 1" 20 9.140
9543 09543-5 1 1/4" 15 9.0
9544 09544-2 1 1/2" 12 8.8
9545 09540-9 2" 8 10.2
Back to Top

SPEC SHEET

Offset Nipples

Use:

Offset nipples are used to provide an offset connection between two outlet boxes or metal enclosures.

Materials

Certification

Standards

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
8302 08302-8 1/2" 2.42 0.94 0.42 - 10/100 10.5
8303 08303-5 3/4" 2.40 1.18 0.42 - 10/100 13.2
8304 08304-2 1" 2.72 1.40 0.60 - 10/100 21.2
8305 08305-9 1 1/4" 2.81 1.81 0.60 - 5/50 14.7
8306 08306-6 1 1/2" 3.00 2.00 0.68 - 5/50 20.2
8307 08307-3 2" 3.15 2.56 0.74 - 2/20 11.4
Back to Top

SPEC SHEET

WaterTight Conduit Hubs

Use:

Watertight hubs are used to terminate threaded conduit to an outlet box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
8490 08490-3 1/2" 1.43 1.50 0.55 20/100 19.2
8491 08491-0 3/4" 1.68 1.50 0.74 20/100 26.1
8492 08492-7 1" 2.00 1.80 0.94 20/100 39.0
8493 08493-4 1 1/4" 2.37 1.80 1.28 10/50 26.4
8494 08494-1 1 1/2" 2.75 1.90 1.51 10/50 36.3
8495 08495-8 2" 3.25 1.90 1.97 5/25 23.6
8496 08496-5 2 1/2" 3.72 2.60 2.40 10 17.5
8497 08497-2 3" 5 11.0
8498 08498-9 3 1/2" 5 13.1
8499 08499-6 4" 5 13.8
Back to Top

SPEC SHEET

Watertight Conduit Hubs

Use:

Watertight hubs are used to terminate threaded conduit to an outlet box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
9800 09800-9 1/2" 13/16" 5/8" 1-1/2" 25/250 45.5
9801 09801-6 3/4" 15/16" 5/8" 1-13/16" 10/100 25.1
9802 09802-3 1" 1 1/16" 3/4" 2 1/16" 10/100 38.9
9803 09803-0 1 1/4" 1 1/4" 3/4" 2 5/8" 2/20 10.9
9804 09804-7 1 1/2" 1 1/4" 13/16" 3 1/8" 2/20 12.7
9805 09805-0 2" 1 1/4" 13/16" 3 9/16" 2/20 19.5
9806 09806-1 2 1/2" 1 5/8" 1 3/16” 4 1/8" 2 3.9
9807 09807-8 3" 1 3/4" 1 1/4" 4 15/16" 2 5.6
9808 09808-5 3 1/2" 1 13/16" 1 5/16" 5 3/4" 1 3.5
9809 09809-2 4 1 15/16" 1 3/8" 6 3/16" 1 4.0
9810 09810-8 5" 2 1/16" 1 7/16" 7 5/8" 1 7.2
9811 09811-5 6" 2 1/8" 1 9/16" 8 13/16" 1 8.9
Back to Top

SPEC SHEET

Service Entrance Ells

Use:

Service entrance ells are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B C Qty/Qty Wt.
Boxed
500 75005-1 1/2" 3.15 1.19 1.45 38 8.0
501 75010-5 3/4" 3.57 1.52 1.77 36 8.0
502 75015-0 1" 4.18 1.75 1.97 12 6.0
503 75020-4 1 1/4" 5.39 2.19 2.44 12 11.5
504 75025-9 1 1/2" 6.10 2.36 2.44 10 10.0
505 75030-3 2" 6.61 2.87 2.93 4 5.5
503-XL 71035-2 1 1/4" XL 7.83 2.48 2.95 5 6.0
505-XL/td> 71040-6 2" XL 9.92 3.13 3.58 5 14.0
* "D" bodies are also threaded for rigid
Back to Top

SPEC SHEET

Mogul Conduit Bodies (Type LB)

Use:

Mogul conduit bodies are used to gain greater access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-31857 Size A B C Qty/Qty Wt.
Boxed
603-MOG 28396-2 1 1/4" 9.61 2.51 2.78 2 3.8
604-MOG 28397-9 1 1/2" 14.48 3.24 5.31 1 4.9
605-MOG 28398-6 2" 14.48 3.24 5.34 1 4.5
Back to Top

SPEC SHEET

LB Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
600-CG 72205-8 1/2" 4.30 1.30 2.40 - 10/100 29.4
601-CG 72210-2 3/4" 5.00 1.50 2.60 - 10/50 22.0
602-CG 72215-7 1" 5.80 1.80 2.90 - 5/25 15.7
603-CG 72220-1 1 1/4" 7.80 2.50 3.70 - 2/10 12.9
604-CG 72225-6 1 1/2" 7.80 2.50 3.90 - 2/10 13.2
605-CG 72230-0 2" 9.80 3.20 4.70 - 1/5 13.4
606-CG 72231-7 2 1/2" 5.80 1.80 2.90 - 1 5.80
607-CG 72232-4 3" 7.80 2.50 3.70 - 1 6.00
608-CG 72233-1 3 1/2" 7.80 2.50 3.90 - 1 9.33
609-CG 72234-8 4" 9.80 3.20 4.70 - 1 10.3
Back to Top

SPEC SHEET

LR Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
100-CG 72305-5 1/2" 4.40 2.10 1.60 - 10/100 31.8
101-CG 72310-9 3/4" 5.10 2.30 1.90 - 10/50 21.0
102-CG 72315-4 1" 5.80 2.50 2.10 - 5/25 17.5
103-CG 72320-8 1 1/4" 7.80 3.40 2.90 - 2/10 15.0
104-CG 72325-3 1 1/2" 7.80 3.40 2.90 - 2/10 14.1
105-CG 72330-7 2" 9.90 4.00 3.70 - 1/5 13.1
106-CG 71241-7 2 1/2" 5.80 2.50 2.10 - 1 5.71
107-CG 71246-2 3" 7.80 3.40 2.90 - 1 6.33
108-CG 19163-2 3 1/2" 7.80 3.40 2.90 - 1 11.2
109-CG 71256-1 4" 9.90 4.00 3.70 - 1 10.2
Back to Top

SPEC SHEET

LL Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

Materials

Certification

Standards

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
200-CG 72405-2 1/2" 4.40 2.10 1.60 - 10/100 30.6
201-CG 72410-6 3/4" 5.10 2.30 1.90 - 10/50 21.0
202-CG 72415-1 1" 5.80 2.50 2.10 - 5/25 16.8
203-CG 72420-5 1 1/4" 7.80 3.40 2.90 - 2/10 15.0
204-CG 72421-2 1 1/2" 7.80 3.40 2.90 - 2/10 13.8
205-CG 72422-9 2" 9.90 4.00 3.70 - 1/5 14.4
206-CG 19622-4 2 1/2" 5.80 2.50 2.10 - 1 5.71
207-CG 19623-1 3" 7.80 3.40 2.90 - 1 6.83
208-CG 19624-8 3 1/2" 7.80 3.40 2.90 - 1 11.0
209-CG 21007-4 4" 9.90 4.00 3.70 - 1 10.3
Back to Top

SPEC SHEET

T Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Assembled with Cover and Gasket

Materials

  • Die-Cast Aluminum

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
700-CG 72605-6 1/2" 4.80 2.10 1.60 - 10/100 32.0
701-CG 72610-0 3/4" 5.50 2.30 1.90 - 10/50 21.7
702-CG 72615-5 1" 6.20 2.50 2.10 - 5/25 14.6
703-CG 72616-2 1 1/4" 8.30 3.40 2.90 - 2/10 17.5
704-CG 72625-4 1 1/2" 8.30 3.40 2.90 - 2/10 15.8
705-CG 72630-8 2" 10.20 4.00 3.70 - 2 5.50
706-CG 19566-1 2 1/2" 6.20 2.50 2.10 - 1 6.00
707-CG 19567-8 3" 8.30 3.40 2.90 - 1 6.50
708-CG 19568-5 3 1/2" 8.30 3.40 2.90 - 1 12.6
709-CG 19569-2 4" 10.20 4.00 3.70 - 1 10.6
Back to Top

SPEC SHEET

C Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Assembled with Cover and Gasket

Materials

  • Die-Cast Aluminum

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
300-CG 72505-9 1/2" 4.80 1.30 1.60 - 10/100 30.6
301-CG 72510-3 3/4" 5.50 1.50 1.90 - 10/50 21.3
302-CG 72515-8 1" 6.20 1.80 2.10 - 5/25 16.6
303-CG 72520-2 1 1/4" 8.30 2.50 2.90 - 2/10 15.0
304-CG 72525-7 1 1/2" 8.30 2.50 2.90 - 2/10 13.8
305-CG 15704-1 2" 10.20 3.20 3.70 - 1/5 12.5
306-CG 15684-6 2 1/2" 6.20 1.80 2.10 - 1 5.66
307-CG 15690-7 3" 8.30 2.50 2.90 - 1 6.33
308-CG 15696-9 3 1/2" 8.30 2.50 2.90 - 1 10.7
309-CG 15704-1 4" 10.20 3.20 3.70 - 1 9.67
Back to Top

SPEC SHEET

X Type: Threaded Aluminum Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • Assembled with Cover and Gasket

Materials

  • Die-Cast Aluminum

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
400-CG 72630-8 1/2" 4.75 1.30 1.60 - 10/100 37.1
400-CG 72630-8 1/2" 4.75 1.30 1.60 - 10/100 37.1
402-CG 72632-2 1" 6.20 1.80 2.10 - 5/25 17.9
403-CG 72633-9 1 1/4" 8.30 2.50 2.90 - 2/10 13.6
404-CG 72634-6 1 1/2" 8.30 2.50 2.90 - 2/10 13.6
405-CG 72635-0 2" 10.20 3.20 3.70 - 2 4.86
Back to Top

SPEC SHEET

LB Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M600 15800-0 1/2" 4.30 1.30 2.40 - 10 7.1
M601 15801-7 3/4" 5.00 1.50 2.60 - 10 9.7
M601 15801-7 3/4" 5.00 1.50 2.60 - 10 9.7
M602 15802-4 1" 5.80 1.80 2.90 - 10 14.3
M603 15803-0 1 1/4" 7.80 2.50 3.70 - 10 28.7
M604 15804-8 1 1/2" 7.80 2.50 3.90 - 10 33.2
M605 15805-0 2" 9.80 3.20 4.70 - 5 26.7
Back to Top

SPEC SHEET

LR Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M100 15830-6 1/2" 4.40 2.10 1.60 - 10 7.1
M101 15831-2 3/4" 5.10 2.30 1.90 - 10 10.0
M102 15832-8 1" 5.80 2.50 2.10 - 10 15.7
M103 15833-4 1" 1/4" 7.80 3.40 2.90 - 10 33.2
M104 15834-7 1" 1/2" 7.80 3.40 2.90 - 10 34.5
M105 15835-3 2" 9.90 4.00 3.70 - 5 31.3
Back to Top

SPEC SHEET

LL Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M200 15820-8 1/2" 4.40 2.10 1.60 - 10 7.6
M201 15821-0 3/4" 5.10 2.30 1.90 - 10 9.5
M202 15822-2 1" 5.80 2.50 2.10 - 10 13.8
M203 15823-9 1 1/4" 7.80 3.40 2.90 - 10 30.9
M204 15824-6 1 1/2" 7.80 3.40 2.90 - 10 33.2
M205 15825-3 2" 9.90 4.00 3.70 - 5 24.9
Back to Top

SPEC SHEET

T Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M700 15840-2 1/2" 4.80 2.10 1.60 - 10 11.1
M701 15841-8 3/4" 5.50 2.30 1.90 - 10 13.7
M702 15842-4 1" 6.20 2.50 2.10 - 10 19.6
M703 15843-0 1 1/4" 8.30 3.40 2.90 - 10 33.2
M704 15844-3 1 1/2" 8.30 3.40 2.90 - 10 36.8
M705 15845-9 2" 10.20 4.00 3.70 - 2 13.3
Back to Top

SPEC SHEET

C Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M300 15810-9 1/2" 4.80 1.30 1.60 - 10 9.8
M301 15811-6 3/4" 5.50 1.50 1.90 - 10 11.8
M302 15812-3 1" 6.20 1.80 2.10 - 10 17.0
M303 15813-0 1 1/4" 8.30 2.50 2.90 - 10 30.9
M304 15814-7 1 1/2" 8.30 2.50 2.90 - 10 36.8
Back to Top

SPEC SHEET

X Type: Threaded Malleable Iron Conduit Bodies

Use:

Conduit bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction.

  • *2 1/2" - 4" Available upon request except "X" type.

Materials

  • Malleable Iron
  • Raised Dome Stamped Steel Covers
  • Neoprene Gaskets

Certification

  • E121488
  • LR57925

Standards

  • UL 514B
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
M400 15860-4 1/2" 5.44 2.81 1.75 - 10 13.9
M401 15861-1 3/4" 6.06 2.94 2.00 - 10 17.2
M402 15862-8 1" 7.13 3.56 2.25 - 10 24.7
M403 15863-5 1 1/4" 9.13 4.44 2.56 - 10 41.6
M404 15864-2 1 1/2" 9.13 4.44 2.75 - 10 46.3
M405 15865-0 2" 11.75 5.38 3.44 - 2 16.7
Back to Top

SPEC SHEET

Stamped Steel Covers: Threaded Malleable Iron Conduit Bodies

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Length Width Thickness
SSC-1 15850-8 1/2" 3.88 1.31 0.25 - 25/250 23.5
SSC-2 15851-4 3/4" 4.63 1.50 0.31 - 25/250 31.3
SSC-3 15852-0 1" 5.31 1.75 0.31 - 10/100 18.8
SSC-4 15853-6 1 1/4"-1 1/2" 7.19 2.50 0.38 - 25 7.80
SSC-5 15854-9 2" 9.50 3.19 0.50 - 25 12.5
Back to Top

SPEC SHEET

Neoprene Gaskets: Threaded Malleable Iron Conduit Bodies

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B Unit Qty/Qty Wt.
Length Width
NG-1 33627-9 1/2" 3.88 1.31 - 2500 27.0
NG-2 33628-6 3/4" 4.69 1.56 - 1000 13.0
NG-3 33629-3 1" 5.38 1.75 - 500 11.0
NG-4 33626-2 1 1/4"-1 1/2" 7.31 2.50 - 500 19.5
NG-5 33630-9 2" 9.50 3.13 - 125 11.0

SPEC SHEET

Rigid Threaded Nipples

Use:

Compression type connectors are used to secure and terminate steel EMT conduit to knock-outs in concrete-tight box, dry or damp location applications.

Materials

  • Zinc Plated Steel

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Ctn/Case Case
Number 0-87115 Size A B Qty/Qty Wt.
Boxed
9700 09700-2 1/2" Close 13/16" 25 2.20
9701 09701-9 1/2" 1-1/2" 13/16" 25 2.38
9702 09702-6 1/2" 2" 13/16" 25 3.30
9703 09703-3 1/2" 2-1/2" 13/16" 25 4.08
9704 09704-0 1/2" 3" 13/16" 25 4.95
9705 09705-7 1/2" 3-1/2" 13/16" 25 6.08
9706 09706-4 1/2" 4" 13/16" 25 6.90
9707 09707-1 1/2" 5" 13/16" 25 8.50
9708 09708-8 1/2" 6" 13/16" 1 0.49
9709 09709-5 1/2" 8" 13/16" 1 0.55
9710 09710-1 1/2" 10" 13/16" 1 0.70
9711 09711-8 1/2" 12" 13/16" 1 0.84
9712 09712-5 3/4" Close 1-1/16" 25 3.03
9713 09713-2 3/4" 2" 1-1/16" 25 3.58
9714 09714-9 3/4" 2-1/2" 1-1/16" 25 4.68
9715 09715-6 3/4" 3" 1-1/16" 25 5.80
9716 09716-3 3/4" 3-1/2" 1-1/16" 25 7.18
9717 09717-0 3/4" 4" 1-1/16" 25 8.28
9718 09718-7 3/4" 5" 1-1/16" 25 10.5
9719 09719-4 3/4" 6" 1-1/16" 1 0.53
9720 09720-0 3/4" 8" 1-1/16" 1 0.70
9721 09721-7 3/4" 10" 1-1/16" 1 0.88
9722 09722-4 3/4" 12" 1-1/16" 1 1.06
9723 09723-1 1" Close 1-5/16" 25 3.58
9724 09724-8 1" 2" 1-5/16" 25 4.40
9725 09725-5 1" 2-1/2" 1-5/16" 25 6.60
9726 09726-2 1" 3" 1-5/16" 25 8.28
9727 09727-9 1"/td> 3-1/2" 1-5/16" 25 9.93
9728 09728-6 1" 4" 1-5/16" 25 11.6
9729 09729-3 1" 5" 1-5/16" 25 14.9
9730 09730-9 1" 6" 1-5/16" 25 18.1
9731 09731-6 1" 8" 1-5/16" 1 0.99
9732 09732-3 1" 10" 1-5/16" 1 1.25
9733 09733-0 1" 12" 1-5/16" 1 1.52
9734 09734-7 1-1/4" Close 1-11/16" 25 4.95
9735 09735-4 1-1/4" 2" 1-11/16" 25 5.53
9736 09736-1 1-1/4" 2-1/2" 1-11/16" 25 8.28
9737 09737-8 1-1/4" 3" 1-11/16" 25 10.5
9738 09738-5 1-1/4" 3-1/2" 1-11/16" 25 14.3
9739 09739-2 1-1/4" 4" 1-11/16" 25 15.4
9740 09740-8 1-1/4" 5" 1-11/16" 25 19.9
9741 09741-5 1-1/4" 6" 1-11/16" 25 23.7
9742 09742-2 1-1/4" 8" 1-11/16" 1 1.35
9743 09743-9 1-1/4" 10" 1-11/16" 1 1.72
9744 09744-6 1-1/4" 12" 1-11/16" 1 2.07
9745 09745-3 1-1/2" Close 1-7/8" 25 5.3
9746 09746-0 1-1/2" 2" 1-7/8" 25 6.08
9747 09747-7 1-1/2" 2-1/2" 1-7/8" 25 8.28
9748 09748-4 1-1/2" 3" 1-7/8" 25 11.0
9749 09749-1 1-1/2" 3-1/2" 1-7/8" 25 13.2
9750 09750-7 1-1/2" 4" 1-7/8" 25 16.5
9751 09751-4 1-1/2" 5" 1-7/8" 25 21.5
9752 09752-1 1-1/2" 6" 1-7/8" 1 1.08
9753 09753-8 1-1/2" 8" 1-7/8" 1 1.52
9754 09754-5 1-1/2" 10" 1-7/8" 1 1.96
9755 09755-2 1-1/2" 12" 1-7/8" 1 2.38
9756 09756-9 2" Close 2-3/8" 25 9.93
9757 09757-6 2" 2-1/2" 2-3/8" 25 10.3
9758 09758-3 2" 3" 2-3/8" 25 14.3
9759 09759-0 2" 3-1/2" 2-3/8" 25 17.7
9760 09760-6 2" 4" 2-3/8" 25 22.1
9761 09761-3 2" 5" 2-3/8" 25 28.7
9762 09762-0 2" 6" 2-3/8" 1 1.43
9763 09763-7 2" 8" 2-3/8" 1 2.03
9764 09764-4 2" 10" 2-3/8" 1 2.82
9765 09765-1 2" 12" 2-3/8" 1 3.26
9766 09766-8 2-1/2" Close 2-7/8" 1 0.61
9767 09767-5 2-1/2" 3" 2-7/8" 1 0.64
9768 09768-2 2-1/2" 3-1/2" 2-7/8" 1 0.88
9769 09769-9 2-1/2" 4" 2-7/8" 1 1.12
9770 09770-5 2-1/2" 5" 2-7/8" 1 1.57
9771 09771-2 2-1/2" 6" 2-7/8" 1 2.05
9772 09772-9 2-1/2" 8" 2-7/8" 1 2.98
9773 09773-6 2-1/2" 10" 2-7/8" 1 3.92
9774 09774-3 2-1/2" 12" 2-7/8" 1 4.87
9775 09775-0 3" Close 3-1/2" 1 0.77
9776 09776-7 3" 3" 3-1/2" 1 0.86
9777 09777-4 3" 3-1/2" 3-1/2" 1 1.15
9778 09778-1 3" 4" 3-1/2" 1 1.48
9779 09779-8 3" 5" 3-1/2" 1 2.05
9780 09780-4 3" 6" 3-1/2" 1 2.62
9781 09781-1 3" 8" 3-1/2" 1 3.79
9782 09782-8 3" 10" 3-1/2" 1 4.96
9783 09783-5 3" 12" 3-1/2" 1 5.75
9784 09784-2 3-1/2" Close 4" 1 0.88
9785 09785-9 3-1/2" 4" 4" 1 2.03
9786 09786-6 3-1/2" 5" 4" 1 2.49
9787 09787-3 3-1/2" 6" 4" 1 3.15
9788 09788-0 3-1/2" 8" 4" 1 4.50
9789 09789-7 3-1/2" 10” 4" 1 5.84
9790 09790-3 3-1/2" 12" 4" 1 7.19
9791 09791-0 4" Close 4-1/2" 1 1.15
9792 09792-7 4" 4" 4-1/2" 1 2.03
9793 09793-4 4" 5" 4-1/2" 1 2.80
9794 09794-1 4" 6" 4-1/2" 1 .57
9795 09795-8 4" 8" 4-1/2" 1 5.18
9796 09796-5 4" 10" 4-1/2" 1 6.68
9797 09797-2 4" 12" 4-1/2" 1 8.25
Back to Top

SPEC SHEET

Rigid One Hole Straps

Use:

One hole straps are used for providing support for Rigid or IMC Conduit as required by the National Electrical Code.

  • Click On Type

Materials

  • Stamped Steel

Finish

  • Zinc Plated

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9320 09320-2 1/2" 1.85 0.62 0.90 - 50/500 17.6
9321 09321-9 3/4" 2.20 0.75 1.13 - 50/500 29.2
9322 09322-6 1" 2.60 0.88 1.32 - 50/500 42.4
9323 09323-3 1 1/4" 2.95 0.88 1.64 - 25/250 29.6
9324 09324-0 1 1/2" 3.62 1.02 1.90 - 25/250 40.5
9325 09325-7 2" 4.09 1.14 2.32 - 25 6.3
*9316 09316-5 2 1/2" 4.90 1.25 3.00 - 25 11.7
*9317 09317-2 3" 5.53 1.25 3.60 - 25 12.7
*9318 09318-9 3 1/2" 6.18 1.25 4.13 - 25 14.2
09319-6 4" 6.68 1.25 4.63 - 25 15.7
*EMT & RIGID
Back to Top

SPEC SHEET

EMT To Box Offset Connectors

Use:

Two hole straps are used for providing support for Rigid or IMC Conduit as required by the National Electrical Code where higher load bearing supports are desired.

  • Click On Type

Materials

  • Stamped Steel

Finish

  • Zinc Plated

Certification

  • E229278

Standards

  • UL 2239
  • CSA C22.2 No. 18
  • NEMA FB-1
  • NEC Article 345 & 346

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9340 09340-0 1/2" 2.48 0.62 0.87 - 50/500 11.8
9341 09341-7 3/4" 2.91 0.69 0.98 - 50/500 14.9
9342 09342-4 1" 3.36 0.75 1.30 - 25/250 13.2
9343 09343-1 1 1/4" 4.09 0.88 1.61 - 50 3.7
9344 09344-8 1 1/2" 4.40 0.94 1.90 - 50 5.3
9345 09345-5 2" 5.11 1 2.30 - 50 6.7
*9336 09336-3 2 1/2" 5.88 1.00 2.91 - 25 5.1
*9337 09337-0 3" 6.50 1.00 3.53 - 25 5.9
9338 09338-7 3 1/2" 7.38 1.00 4.03 - 25 8.3
*9339 09339-4 4" 8.00 1.00 4.53 - 25 9.1
*EMT & RIGID
Back to Top

SPEC SHEET

Malleable Clamp Back

Use:

Used to provide space between rigid conduit or IMC and mounting surface. Can be used with one hole straps. Cast of high strength malleable iron and zinc plated.

Materials

  • Malleable Iron

Finish

  • Zinc Plated

Certification

  • LR57925

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9500 09500 1/2" 4.80 1.95 0.96 - 25/250 24.1
9501 09501 3/4" 5.42 2.50 0.78 - 25/250 26.2
9502 09502 1" 6.79 2.68 0.86 - 25/125 17.8
9503 09503 1 1/4" 7.32 2.89 1.06 - 20/100 21.7
9504 09504 1 1/2" 8.07 3.48 1.09 - 10/100 28.9
9505 09505 2" 4.80 1.95 0.96 - 10/50 26.3
9506 09506 2 1/2" 5.42 2.50 0.78 - 10 6.5
9507 09507 3" 6.79 2.68 0.86 - 10 10.7
9508 09508 3 1/2" 7.32 2.89 1.06 - 10 14.0
9509 09509 4" 8.07 3.48 1.09 - 10 15.7
Back to Top

SPEC SHEET

Rigid Conduit Hangers W / Nut & Bolt

Use:

Compression type connectors are used to secure and terminate steel EMT conduit to knock-outs in concrete-tight box, dry or damp location applications.

  • With Carriage Bolt and Nut Attached

Materials

  • Stamped Steel

Finish

  • Zinc Plated

Certification

  • E186443
  • LR104691

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9450 09450-6 3/8", 1/2" 1.95 0.75 0.70 - 50/500 38.6
9451 09451-3 3/4" 2.21 0.75 0.82 - 100 8.3
9452 09452-0 1" 2.53 0.86 0.93 - 100 10.0
9453 09453-7 1 1/4" 2.72 0.86 0.98 - 100 12.2
9454 09454-4 1 1/2" 3.01 0.86 1.03 - 100 13.5
9455 09455-1 2" 3.31 0.96 1.10 - 100 18.9
9456 09456-8 2 1/2" 4.05 0.96 1.12 - 50 10.7
9457 09457-5 3" 4.60 1.18 1.25 - 25 7.5
9458 09458-2 3 1/2" 5.31 1.18 1.25 - 10 4.6
9459 09459-9 4" 5.31 1.18 1.25 - 10 4.6
Back to Top

SPEC SHEET

Rigid Conduit Hangers W / O Nut & Bolt

Use:

Conduit hangers are used to secure and suspend EMT, Rigid, IMC and PVC Conduits from overhead supports.

  • Without Carriage Bolt and Nut Attached

Materials

  • Stamped Steel

Finish

  • Zinc Plated

Certification

  • E186443
  • LR104691

ORDERING INFORMATION

Catalog Number UPC No Trade Nominal Dimensions Pcs/ Ctn/Case Case
Number 0-87115 Size A B C Unit Qty/Qty Wt.
Boxed
9440 09440-7 3/8", 1/2" 1.95 0.75 0.70 - 50/500 38.6
9441 09441-4 3/4" 2.21 0.75 0.82 - 100 8.3
9442 09442-1 1" 2.53 0.86 0.93 - 100 10.0
9443 09443-8 1 1/4" 2.72 0.86 0.98 - 100 12.2
9444 09444-5 1 1/2" 3.01 0.86 1.03 - 100 13.5
9445 09445-2 2" 3.31 0.96 1.10 - 100 18.9
9446 09446-9 2 1/2" 4.05 0.96 1.12 - 50 10.7
9447 09447-6 3" 4.60 1.18 1.25 - 25 7.5
9448 09448-3 3 1/2" 5.31 1.18 1.25 - 10 4.6
9449 09449-0 4" 5.31 1.18 1.25 - 10 4.6
Back to Top

© 2009 Teddico/BWF